Wall Cavity Systems
Downloads for this Product:
Wall Cavity Systems
Wall Cavity is the spray application of fiber with or without adhesive into a wall cavity to later be covered with drywall or a sheathing material.
An all-fiber airlock machine, providing sufficient agitation for blending of recycled fiber and blower pressure to blow moisture laden recycled fiber through hose.
Capable of pumping water with or without adhesives at the required pressure (p.s.i.), capacity (g.p.m.) and smoothness of spray pattern.
In situations where only water is used, a filter system and tank with a large capacity (100 – 200 gallons/26.4 – 52.8 liters) is used.
A wide oval discharge throat and rugged, quick-change tips allow for the maximum flow of coarse, wet, recycled fibers while offering a quick easy change of nozzle tips.
Device used to quickly remove excess sprayed fiber on wall studs and interior corners.
348 Pump/Motor Assembly
Includes: Control bypass assembly with pressure gauge and shut-off ball valve, fittings for input, discharge and bypass recirculation hoses. Units are easily cleaned by running water through the system for a few minutes immediately after use. The TEFC overload protected electric motor operates on 120/240volt 60hz and supplies adequate power for standard spray-on applications. The units are mounted on a steel base with belt guard and convenient carrying handle. Larger motors providing higher pressure and capacity are available upon request on the MP-20 pump and M-03. (230volt/50hz available for export) [hoses and in-line filter available upon request]
Wall Cavity Nozzle
Includes: The wall cavity nozzle has a wide oval discharge through allowing for the maximum flow of coarse, wet, recycled fibers without plugging. Rigid attachment of the spray tip body to internally machined head eliminates misalignment and nuisance pressure tubing leaks caused by frequent accidental impacts. The turn-lock tips offer quick change features.
- all-aluminum internally machined spray head
- quick-jet brass spray tips for fast insertion and removal
- 2″ (5.1cm.), 2 1/2″ (6.4cm.) or 3″ (7.6 cm.) diameter connection for insulation supply hose
- 3/8″ (9.5mm.) hose connection with shut-off ball valve for liquid supply hose
- (additional tip sizes available upon request)
#25015 2″ (5.1 cm) nozzle:1.4 lbs ( .6 kg)#2502 2 2/2″ (6.4 cm) nozzle:
1.6 lbs ( .7 kg )
#2503 3″ (7.6 cm) nozzle:
2.8 lbs ( 1.2 kg)
Packages & Options
|Wall Cavity Nozzles||349WC2.5-2-M 2-1/2″ Wall Cavity Nozzle (Less Tips) 2 Jet|
|Wall Cavity Nozzles||349WC2-2-M 2″ Wall Cavity Nozzle (Less Tips) 2 Jet|
|Wall Cavity Nozzles||349WC3-2 3″ Wall Cavity Nozzle (Less Tips) 2 Jet|
|Wall Cavity Spray Tips||QVVA2501 Wall Cavity Spray Tips (.026 opening)|
|Wall Cavity Spray Tips||QVVA25015 Wal Cavity Spray Tips (.031 opening)|
|Wall Cavity Spray Tips||QVVA2502 Wall Cavity Spray Tips (.036 opening)|
|Wall Cavity Spray Tips||QVVA2503 Wall Cavity Spray Tips (.043 opening)|
|Wall Scrubbers||349B-A Wall Scrubber 27″ (Parallel)|
|Wall Scrubbers||349B-B Wall Scrubber 27″ (Par. w/Ext. Frame)|
|Wall Scrubbers||349B-C Wall Scrubber 27″ (Vert. w/Ext. Frame)|
|Wall Scrubbers||349B-D Wall Scrubber 18″ (Parallel)|
|Wall Scrubbers||Wall Scrubber 18″ (Par. w/Ext. Frame)|